Information manufacturer of rigid anchor line PPE certified manufacturer information must be provided in the language of the destination country. It must meet the standard EN 365: 1992 Section 2.1 of the guidelines, this also must contain at least the following recommendations and information: a) specific conditions, such as the horizontal distance A, oriented in the distance with a rigid anchor rope fall arrester can use; b) a rigid anchor line installation instructions; c) advice and information on how to connect with the body fall arrest systems tether and other components; d) oriented on how to ensure a rigid anchor rope and fall with brake connection compatibility of advice and information to all parts, such as see other European standards; e) for fall-oriented brakes, you should use only the recommended diameter and type of rigid anchor rope; f) if the system is to provide a complete, any complete System parts are not replaced; g) in a rigid anchor ropes, the right way to manipulate oriented brakes fall; h) if oriented fall arrester from the rigid anchor line removal, and then how to connect from; i) For the mass of 100 kg, fall factor 2 situation (worst-case), the minimum distance of two meters at the foot of the user; j) as in the first two meters, from the ground impact protection, it is suggested that users climb and down You must be careful; harsh conditions k) the limitations of the material in the relevant product or affect performance, such as temperature, sharp edge, chemicals, electrical conductivity, cut, abrasion, UV degradation, and other weather conditions; l) prior to use and use, the need to consider how to safely and effectively perform rescue; m) Only trained and / or qualified personnel can use the product, or the user must be under the direct supervision of such personnel; n) how to clean this product , including how sterilization without adverse effects; o) if the information exists, the life expectancy of the product (to be discarded), or how to determine the product life; p) how to protect the product transportation; on q) products of various labeled meaning ; r) oriented type fall arrester, or with rigid anchor rope fall arrester oriented model / type of mark; s) the serial number of this European Standard, ie EN 353-1.