Marked fall-oriented brakes and a rigid anchor rope marks, shall comply with standard EN 365: 1992 Section 2.2 of the regulations, and any text must be in the language of the destination country. In addition must meet the standards EN 365: 1992 as provided in Section 2.2, marking must also contain the following information: a) In the oriented fall on brakes, with a pictogram that the user should read the information provided by the manufacturer b) If appropriate, e.g., if oriented fall arrester remove from a rigid anchor line, oriented in a marked fall on the braking device, shows that the proper orientation for use; c) if appropriate, for example, fall arrest oriented If a rigid anchor line from the device to remove a label, indicating oriented fall arrester can only be used in appropriate rigid anchor rope. The label can guide type fall arrester, the rigid anchor ropes, but also close to the rigid anchor line at; d) fall brakes oriented model / type identification; e) the number of European standards, namely EN 353 -1